Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13597212
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
- home > Supply > In clean pipes, pert floor heating pipe specifications, Anyang pert floor heating pipe
Information Name: | In clean pipes, pert floor heating pipe specifications, Anyang pert floor heating pipe |
Published: | 2014-11-05 |
Validity: | 0 |
Specifications: | Any |
Quantity: | |
Price Description: | |
Detailed Product Description: | In clean pipes, pert floor heating pipe specifications, Anyang pert floor heating pipe cleaning pipe provided by China. We are Zhejiang Jie Pipeline Ltd., Zhengzhou Office (www.pprgc.com) at: Zhengzhou specializes in: PP-R hot and cold water pipes, F-PPR performance glass fiber reinforced composite pipes, PP-R aluminum PE-RT warm tube specifications: nominal diameter dn average outside diameter roundness of the series S6.3S5S4S3.2S2.5 dmindmax straight pipe coil nominal wall thickness en 1616.016.3≤1.0≤1.0--2.02.22.7 2020.020.3≤1.0≤1.2 -2.02.32.83.4 2525.025.3≤1.0≤1.52.02.32.83.54.2 PE-RT floor heating pipe installation points PE-RT to warm the pipe should be strictly in accordance with the paper did not juice pottery calibration tube spacing and direction of laying pipe should be kept warm flat, straight, tube spacing installation error should be less than + 10mm pert floor heating pipe performance, before laying floor heating pipe should control the approved construction drawings to selection, diameter, thick warm tube Organisation meets the design requirements; Confirm that there are no problems after installation. PE-RT floor heating pipe installation should prohibit piping fresh twist; bending pipe pert floor heating pipe, the top of the arc should be limited (against), and fixed pert floor heating pipe specifications pipe card, to prevent "dead fold"; warm the bending radius of the tube is not less than 8 times the tube diameter. Fixed-point spacing, straight pipe section from a fixed point Q should not exceed 0.Tin. Fixed point spacing curved pipe section should not exceed 0.35m PE-RT floor heating pipe laying. PE-RT to warm the pipe out of the ground to points catchment some small elbow joints:}} out of the ground and strong decorative layer, to warm the pipe out of the ground to points catchment BU Department of Ming Court attached a few balls between. pipe sections, the external should jacketed dressed leather material casing, Lian pipe should be above the decorative surface 150-200nRll. PE-RT floor heating pipe and sub-catchment device and tube connections should be used ferrule connector; connector material is copper. Brass fittings in direct contact with the surface must PE_RT nickel-plated. PE-RT floor heating pipe loops arranged in construction joints pert as possible and want to warm the pipe, through the expansion joints, should be located at both ends of a length of not less than uniform 100ram the flexible sleeve. In minutes, near the catchment as well as other local warm-intensive parts of the tube arrangement, when the tube spacing is less than 100mm, should be located outside of the tube to warm spring flexible casing insulation measures. |
Admin>>>
You are the 20893 visitor
Copyright © GuangDong ICP No. 10089450, Zhejiang Jie Pipeline Limited Zhengzhou Office All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 20893 visitor
Copyright © GuangDong ICP No. 10089450, Zhejiang Jie Pipeline Limited Zhengzhou Office All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility